Главная > Документ


23rd Symposium on Fusion Technology

20 - 24 September 2004 - Fondazione Cini, Venice, Italy

Book of Abstracts

Consorzio RFX – EURATOM - ENEA

PROGRAM

ORAL SESSIONS

  • O1-A Arazzi Hall Monday, 20th 14:00-15:30

  • O1-B Barbantini Hall Monday, 20th 14:00-15:30

  • O2-A Arazzi Hall Tuesday, 21th 09:00-09:30

  • O2-B Barbantini Hall Tuesday, 21th 09:00-09:30

  • O3-A Arazzi Hall Tuesday, 21th 14:00-15:30

  • O3-B Barbantini Hall Tuesday, 21th 14:00-15:30

  • O4-A Arazzi Hall Thursday, 23th 14:00-15:30

  • O4-B Barbantini Hall Thursday, 23th 14:00-15:30

POSTER SESSIONS

  • P1-C Capriate Hall Monday, 20th 16:00-18:00 H-K-I

  • P1-T Tipografia Hall Monday, 20th 16:00-18:00 I

  • P2-C Capriate Hall Tuesday, 21th 16:00-18:00 D

  • P2-T Tipografia Hall Tuesday, 21th 16:00-18:00 E

  • P3-C Capriate Hall Wednesday, 22th 11:30-13:30 A-C

  • P3-T Tipografia Hall Wednesday, 22th 11:30-13:30 B

  • P4-C Capriate Hall Thursday, 23th 16:00-18:00 F

  • P4-T Tipografia Hall Thursday, 23th 16:00-18:00 G-J

Paper Code

P 4 B – J – 491

ID NUMBER

TOPIC

HALL (A=Arazzi B= Barbantini C =Capriate T= Tipografia

SESSION

CATEGORY (P=Poster O=Oral)

Oral presentations are highlighted in red.

INDEX

PROGRAM 2

- A - Current and Next Step Devices 15

P3C-A-11 SELECTION OF DESIGN SOLUTIONS AND FABRICATION METHODS AND SUPPORTING R&D FOR PROCUREMENT OF ITER VESSEL AND FW/BLANKET 15

P3C-A-16 THE PROTO-SPHERA LOAD ASSEMBLY 16

P3C-A-72 OVERVIEW OF THE DIII–D PROGRAM AND CONSTRUCTION PLANS* 17

P3C-A-90 COMMISSIONING AND PRELIMINARY OPERATION OF THE HL-2A TOKAMAK 18

P3C-A-144 PLASMA PHYSICS BASIS AND OPERATIONS OF FUSION-DRIVEN SUBCRITICAL SYSTEM 19

P3C-A-184 THE WENDELSTEIN 7-X MECHANICAL STRUCTURE SUPPORT ELEMENTS: TESTS AND DESIGN 20

P3C-A-203 LEVITATION EXPERIMENTS OF A HIGH TEMPERATURE SUPERCONDUCTOR COIL IN THE INTERNAL COIL DEVICE MINI-RT 21

P3C-A-245 EXPERIMENTAL STUDY OF WATER FLOW DISTRIBUTION INSIDE TWO-CHANNEL MODEL OF ITER VACUUM VESSEL COOLING SYSTEM 22

P3C-A-262 MAGNUM-PSI, A PLASMA GENERATOR FOR PLASMA-SURFACE INTERACTION RESEARCH IN ITER-LIKE CONDITIONS 23

P3C-A-330 THE LASER MÉGAJOULE (LMJ) PROJECT DEDICATED TO INERTIAL CONFINEMENT FUSION : DEVELOPMENT AND CONSTRUCTION STATUS. 24

P3C-A-449 JET ENGINEERING: PROGRESS AND PLANS 25

P3C-A-468 THE JET-ENHANCED PERFORMANCE PROGRAM: MORE HEATING POWER AND DIAGNOSTIC CAPABILITIES IN PREPARATION FOR ITER 26

P3C-A-518 NUCLEAR ANALYSES OF SOME KEY ASPECTS OF THE ITER DESIGN WITH MONTE CARLO CODES 27

P3C-A-522 TRANSPORT, LOGISTICS AND PACKAGING OF ITER COMPONENTS 28

P3C-A-523 STUDIES FOR SITE PREPARATION FOR ITER CONSTRUCTION 29

P3C-A-531 READINESS OF CADARACHE FOR STARTING ITER CONSTRUCTION 30

- B - Plasma Heating and Current Drive. 31

P3T-B-19 THE ALCATOR C-MOD LOWER HYBRID CURRENT DRIVE EXPERIMENT TRANSMITTER 31

P3T-B-25 DESIGN OF AN ULTRA-BROADBAND SINGLE-DISK OUTPUT WINDOW FOR A FREQUENCY STEP-TUNABLE 1 MW GYROTRON 32

P3T-B-51 EXPERIMENTS ON A 170 GHZ COAXIAL CAVITY GYROTRON 33

P3T-B-78 THE UPGRADE OF THE DIII-D EC SYSTEM USING 120 GHZ ITER GYROTRONS 34

P3T-B-82 THE LHCD LAUNCHER FOR ALCATOR C-MOD – DESIGN, CONSTRUCTION, CALIBRATION AND TESTING* 35

P3T-B-94 DESIGN AND OPERATION OF THE WENDELSTEIN 7-X ECRH HIGH VOLTAGE POWER SUPPLIES 36

P3T-B-113 THERMAL ANALYSIS AND OHMIC LOSS ESTIMATION OF POLARIZER FOR ITER ECCD SYSTEM 37

P3T-B-152 TESTS OF LOAD-TOLERANT EXTERNAL CONJUGATE-T MATCHING SYSTEM FOR A2 ICRF ANTENNA AT JET 38

P3T-B-156 NEUTRONIC ANALYSIS OF ITER NEUTRAL BEAM TEST BED 39

P3T-B-160 A REVIEW OF JET NEUTRAL BEAM SYSTEM PERFORMANCE 1994 TO 2003 40

P3T-B-165 DEVELOPING A FULL SCALE ECRH MM-WAVE LAUNCHING SYSTEM MOCK-UP FOR ITER 41

P3T-B-171 DIGITAL MOCK-UP DESIGN OF THE REMOTE STEERABLE ITER ECRH LAUNCHING SYSTEM 42

P3T-B-172 PRE STUDY RESULTS ON HIGH VOLTAGE SOLID-STATE SWITCHES FOR GYROTRON PROTECTION. 43

P3T-B-173 AN ALTERNATIVE ECRH FRONT STEERING LAUNCHER FOR THE ITER UPPER PORT 44

P3T-B-174 DESIGN OF THE MM-WAVE SYSTEM OF THE ECRH UPPER LAUNCHER FOR ITER 45

P3T-B-175 DEVELOPING THE NEXT LHCD SOURCE FOR TORE SUPRA 46

P3T-B-180 TOWARD AN LHCD SYSTEM FOR ITER 47

P3T-B-181 A N-PORT ERROR MODEL AND CALIBRATION PROCEDURE FOR MEASURING THE SCATTERING MATRICES OF LOWER-HYBRID MULTIJUNCTIONS 48

P3T-B-182 DESIGN AND FABRICATION OF THE ";ITER-LIKE"; SINGAP D¯ ACCELERATION SYSTEM 49

P3T-B-185 OPERATIONAL EXPERIENCE WITH UPGRADED JET NEUTRAL BEAM INJECTION SYSTEMS 50

P3T-B-187 MAST NEUTRAL BEAM LONG PULSE UPGRADE 51

P3T-B-188 THE ITER NEUTRAL BEAM TEST FACILITY : DESIGNS OF THE GENERAL INFRASTRUCTURE, CRYOSYSTEM AND COOLING PLANT 52

P3T-B-201 PROGRESS OF THE KSTAR ICRF COMPONENTS DEVELOPMENT FOR LONG PULSE OPERATION 53

P3T-B-204 RECENT PROGRESS OF NEGATIVE ION BASED NEUTRAL BEAM INJECTOR FOR JT-60U 54

P3T-B-210 TESTS AND FIRST RESULTS OF A LOAD RESILIENT ICRH ANTENNA ON TEXTOR 55

P3T-B-211 REALISATION OF A TEST FACILITY FOR THE ICRH ITER PLUG-IN BY MEANS OF A MOCK-UP WITH SALTED WATER LOAD 56

P3T-B-218 STUDY OF MUTUAL COUPLING EFFECTS IN THE ANTENNA ARRAY OF THE ICRH PLUG-IN FOR ITER 57

P3T-B-221 STATUS AND PLANS FOR THE DEVELOPMENT OF AN RF NEGATIVE ION SOURCE FOR ITER NBI 58

P3T-B-225 DEVELOPMENT AND CONTRIBUTION OF RF HEATING AND CURRENT DRIVE SYSTEMS TO LONG PULSE, HIGH PERFORMANCE EXPERIMENTS IN JT-60U 59

P3T-B-227 RF-SOURCE DEVELOPMENT FOR ITER: LARGE AREA H- BEAM EXTRACTION, MODIFICATIONS FOR LONG PULSE OPERATION AND DESIGN OF A HALF SIZE ITER SOURCE 60

P3T-B-229 DIAGNOSTICS AND MODELING OF THE PLASMA IN BATMAN RADIO FREQUENCY ION SOURCE 61

P3T-B-246 ECH MW-LEVEL CW TRANSMISSION LINE COMPONENTS SUITABLE FOR ITER 62

P3T-B-267 STATUS OF THE TJ-II ELECTRON BERNSTEIN WAVES HEATING PROJECT 63

P3T-B-283 THE ASDEX UPGRADE ICRF SYSTEM: OPERATIONAL EXPERIENCE AND DEVELOPMENTS 64

P3T-B-300 COOLING CONCEPTS OF THE ECRH LAUNCHER STRUCTURE AND THE TORUS WINDOWS 65

P3T-B-310 THE DESIGN OF THE CONTROL SYSTEM FOR THE NEUTRAL BEAM INJECTION IN HT-7 66

P3T-B-312 EXPERIMENTAL STUDY ON UNIFORMITY OF H- ION BEAM IN A LARGE NEGATIVE ION SOURCE 67

P3T-B-314 DEVELOPMENT OF RELIABLE DIAMOND WINDOW FOR EC LAUNCHER ON FUSION REACTORS 68

P3T-B-320 DESIGN OF HIGH POWER COAXIAL DC BREAK FOR ADITYA TOKAMAK 69

P3T-B-332 W7-X NEUTRAL-BEAM-INJECTION: TRANSMISSION, POWER-LOAD TO THE DUCT AND INNER VESSEL AND CONSEQUENCES OF THE STELLARATOR STRAY FIELD 70

P3T-B-337 DIAGNOSTICS OF THE CESIUM AMOUNT IN A RF NEGATIVE ION SOURCE AND THE CORRELATION WITH THE EXTRACTED CURRENT DENSITY 71

P3T-B-345 LONG PULSE OPERATION ON THE KAMABOKO III ION SOURCE. 72

P3T-B-351 DESIGN AND TEST OF A HV DEVICE FOR PROTECTION AND POWER MODULATION OF 140 GHZ/1MW CW-GYROTRONS USED FOR ECRH ON W7-X 73

P3T-B-353 DEVELOPMENT OF CW AND SHORT-PULSE CALORIMETRIC LOADS FOR HIGH POWER MILLIMETER-WAVE BEAMS 74

P3T-B-356 ITER-LIKE PAM LAUNCHER FOR TORE SUPRA’S LHCD SYSTEM 75

P3T-B-359 LARGE CRYOSORPTION PUMP OF THE TEST STAND FOR THE KSTAR NBI SYSTEM 76

P3T-B-362 DEVELOPMENT OF A RF SOURCE FOR ITER NBI: FIRST RESULTS WITH D- OPERATION 77

P3T-B-364 PERFORMANCE TEST OF THE LH ANTENNA WITH CARBON GRILL IN JT-60U 78

P3T-B-371 FIRST RESULTS OF THE TORE SUPRA ITER LIKE ICRF ANTENNA PROTOTYPE 79

P3T-B-372 TORE SUPRA ITER-LIKE ANTENNA CHARACTERIZATION BY FEM ANALYSIS 80

P3T-B-382 MAINTENANCE SCHEMES FOR THE ITER NEUTRAL BEAM INJECTOR TEST FACILITY 81

P3T-B-385 NEUTRAL BEAM INJECTION OPTIMIZATION AT TJ-II 82

P3T-B-387 STATUS OF THE 140 GHZ / 10 MW CW TRANSMISSION SYSTEM FOR ECRH ON THE STELLARATOR W7-X 83

P3T-B-392 THE TEST OF A PAM LAUNCHER ON FTU: THE FIRST STEP TOWARD THE LHCD LAUNCHER FOR ITER 84

P3T-B-410 MATERIAL PROCESSING AND PROTOTYPE FABRICATION OF HEAT TRANSFER ELEMENTS FOR SST-1 NBI SYSTEM. 85

P3T-B-412 AN ALTERNATIVE SCHEME FOR THE ITER NBI POWER SUPPLY SYSTEM 86

P3T-B-439 NEUTRONICS ANALYSIS OF THE ECW LAUNCHING SYSTEM IN THE ITER UPPER PORT 87

P3T-B-455 THE ITER-LIKE ICRF ANTENNA FOR JET 88

P3T-B-460 EFFECTS OF MUTUAL COUPLING ON ICRF LOAD-TOLERANT ANTENNAS 89

P3T-B-479 140-GHZ HIGH-POWER GYROTRON DEVELOPMENT FOR THE STELLARATOR W7-X 90

P3T-B-501 DEVELOPMENT OF THE 140 GHZ GYROTRON AND ITS SUBSYSTEMS FOR ECH AND ECCD IN TEXTOR 91

P3T-B-507 DESIGN OF CRYOSORPTION PUMPS FOR TESTBEDS OF ITER RELEVANT NEUTRAL BEAM INJECTORS 92

P3T-B-512 STATUS OF THE NEW ECRH SYSTEM FOR ASDEX UPGRADE 93

P3T-B-514 IMPROVED 118 GHZ GYROTRON FOR ECRH EXPERIMENTS ON TORE SUPRA 94

P3T-B-542 MATCHING TO ELMY PLASMAS IN THE ICRF DOMAIN 95

- C - Plasma Engineering and Control. 96

P3C-C-62 OPTIMISED MODELLING OF THE TORE SUPRA TOKAMAK FOR PLASMA EQUILIBRIUM CALCULATIONS WITH THE PROTEUS CODE 96

P3C-C-77 HIGH PERFORMANCE INTEGRATED PLASMA CONTROL IN DIII–D* 97

P3C-C-79 PROGRESS TOWARDS ACHIEVING PROFILE CONTROL IN THE RECENTLY UPGRADED DIII-D PLASMA CONTROL SYSTEM* 98

P3C-C-103 REAL TIME CONTROL OF FULLY NON-INDUCTIVE OPERATION IN TORE SUPRA LEADING TO 1GJ PLASMA DISCHARGES 99

P3C-C-114 FEEDBACK CONTROL FOR PLASMA POSITION IN HL-2A TOKAMAK 100

P3C-C-149 DIII-D INTEGRATED PLASMA CONTROL TOOLS APPLIED TO NEXT GENERATION TOKAMAKS* 101

P3C-C-155 CONFIGURATION AND PERTURBATION DEPENDENCE OF THE NEUTRAL POINT IN JET 102

P3C-C-157 DEVELOPMENT OF THE DINA-CH FULL DISCHARGE TOKAMAK SIMULATOR 103

P3C-C-161 DESIGN, IMPLEMENTATION AND TEST OF THE EXTREME SHAPE CONTROLLER (XSC) IN JET 104

P3C-C-190 CORRECTION POSSIBILITIES OF MAGNETIC FIELD ERRORS IN WENDELSTEIN 7-X 105

P3C-C-207 REAL TIME CONTROL ENVIRONMENT IN THE RFX EXPERIMENT 106

P3C-C-233 A FAST AND VERSATILE INTERLOCK SYSTEM 107

P3C-C-268 NEW VISUALIZATION SYSTEM FOR CONTROLLING AND MONITORING PURPOSES IN THE TJ-II STELLARATOR 108

P3C-C-277 WEB-BASED GROUND LOOP SUPERVISION SYSTEM FOR THE TJ-II STELLARATOR 109

P3C-C-291 A NEW CONTROLLER FOR THE JET ERROR FIELD CORRECTION COILS 110

P3C-C-298 USING REAL TIME WORKSHOP FOR RAPID AND RELIABLE CONTROL IMPLEMENTATION IN THE FRASCATI TOKAMAK UPGRADE FEEDBACK CONTROL SYSTEM RUNNING UNDER RTAI-LINUX 111

P3C-C-301 THE SYSTEM ARCHITECTURE OF THE NEW JET SHAPE CONTROLLER 112

P3C-C-350 AN INTEGRAL APPROACH TO PLASMA SHAPE CONTROL 113

P3C-C-352 LINEARIZED MODELS OF THE PLASMA RESPONSE IN THE NEW RFX LOAD ASSEMBLY 114

P3C-C-354 DESIGN OF THE NEW RFX EQUILIBRIUM ACTIVE CONTROL SYSTEM 115

P3C-C-363 REAL-TIME MEASUREMENT AND CONTROL AT JET- EXPERIMENT CONTROL 116

P3C-C-375 OPEN LOOP CHARACTERIZATION OF AN ACTIVE CONTROL SYSTEM OF MHD MODES 117

P3C-C-377 COMPARISON OF STRATEGIES AND REGULATOR DESIGN FOR ACTIVE CONTROL OF MHD MODES 118

P3C-C-383 ADOPTING MODERN NONLINEAR CONTROL TECHNIQUES FOR THE PLASMA STABILIZATION ON THE NOVEL LINUX-BASED FEEDBACK CONTROLLER OF FTU 119

P3C-C-403 VERTICAL STABILITY OF ITER PLASMAS WITH 3D PASSIVE STRUCTURES AND A DOUBLE LOOP CONTROL SYSTEM 120

P3C-C-408 THE BASIC METHODS FOR UNDERSTANDING OF PLASMA EQUILIBRIUM TOWARD ADVANCED CONTROL 121

P3C-C-457 XSC PLASMA CONTROL: TOOL DEVELOPMENT FOR THE SESSION LEADER 122

P3C-C-463 A FLEXIBLE AND REUSABLE SOFTWARE FOR REAL-TIME CONTROL APPLICATIONS AT JET 123

P3C-C-508 COMMISSIONING TESTS FOR CONTROL PROCESSES IN ASDEX UPGRADE´S NEW CONTROL AND DATA ACQUISITION SYSTEM 124

P3C-C-510 OPTIMIZATION OF THE IGNITOR OPERATING SCENARIO AT 11 MA 125

P3C-C-517 PLASMA FEEDBACK CONTROLLER REORGANISATION FOR ASDEX UPGRADE'S NEW DISCHARGE CONTROL AND DATA ACQUISITION SYSTEM 126

- D - Diagnostics, Data Acquisition and Remote Participation. 127

P2C-D-22 NEUTRON ANALYSIS OF H-ALPHA AND CXRS DIAGNOSTICS OF ITER 127

P2C-D-42 NEW CONSTRAINTS FOR PLASMA DIAGNOSTICS DEVELOPMENT DUE TO THE HARSH ENVIRONMENT OF MJ CLASS LASERS 128

P2C-D-52 THE INTEGRATED VISUALISATION SOFTWARE FOR THE ITER IN VESSEL VIEWING SYSTEM (IVVS) 129

P2C-D-60 USING REMOTE PARTICIPATION TOOLS TO IMPROVE COLLABORATIONS 130

P2C-D-74 CALORIMETRY MEASUREMENTS DURING HIGH ENERGY DISCHARGES AT TORE SUPRA 131

P2C-D-80 REAL-TIME MULTIPLE NETWORKED VIEWER CAPABILITY OF THE DIII-D EC DATA ACQUISITION SYSTEM* 132

P2C-D-91 EXPERIMENTAL STUDY OF RADIATION-INDUCED CURRENTS IN COPPER AND STAINLESS STEEL CORE MINERAL-INSULATED CABLES IN THE BR2 RESEARCH REACTOR 133

P2C-D-98 TORE-SUPRA INFRARED THERMOGRAPHY SYSTEM, A REAL STEADY STATE DIAGNOSTIC. 134

P2C-D-104 NEW INSTRUMENTS FOR ADVANCED NEUTRON EMISSION SPECTROMETRY DIAGNOSIS OF D AND DT PLASMAS AT JET 135

P2C-D-119 SURFACE DIAGNOSTICS WITH APPLICATION OF VIDEOSCOPE ON THE BASIS OF CU-LASER 136

P2C-D-120 NEW MANAGING SYSTEM OF A LARGE AMOUNT OF IMAGES ON TORE SUPRA 137

P2C-D-132 RADIATION RESISTANT BOLOMETERS USING PLATINUM ON AL2O3 AND ALN 138

P2C-D-142 TEMPERATURE DEPENDENCE OF THE TRANSMISSION LOSS IN KU-1 AND KS-4V QUARTZ GLASSES FOR THE ITER DIAGNOSTIC WINDOW 139

P2C-D-159 THERMAL AND NEUTRON TESTS OF MULTILAYERED DIELECTRIC MIRRORS 140

P2C-D-166 LASER DAMAGE INVESTIGATIONS OF CU MIRRORS 141

P2C-D-194 DESIGN OF LOST ALPHA PARTICLE DIAGNOSTICS FOR JET* 142

P2C-D-202 DEVELOPMENT OF THE PHASE COUNTER WITH THE REAL-TIME FRINGE JUMP CORRECTOR FOR INTERFEROMETER ON LHD 143

P2C-D-208 DATA ACQUISITION UPGRADE IN THE RFX EXPERIMENT 144

P2C-D-220 THERMAL DETECTOR FOR THE LOST ALPHA PARTICLE MEASUREMENTS 145

P2C-D-226 ITER RELEVANT DEVELOPMENTS OF NEUTRON DIAGNOSTICS DURING JET TRACE TRITIUM CAMPAIGN 146

P2C-D-230 OPTICAL AND ELECTRICAL DEGRADATION OF HYDROGEN IMPLANTED KS-4V QUARTZ GLASS 147

P2C-D-234 RECONSTRUCTION CAPABILITY OF JET MAGNETIC SENSORS 148

P2C-D-235 QUENCH DETECTION & DATA ACQUISITION SYSTEM FOR SST-1 SUPERCONDUCTING MAGNETS 149

P2C-D-248 LASER DAMAGE OF KU-1 SILICA GLASS COVERED WITH HYDROCARBON FILM 150

P2C-D-250 WIDE AREA DATA REPLICATION IN AN ITER-RELEVANT DATA ENVIRONMENT 151

P2C-D-251 ADVANCES IN REMOTE PARTICIPATION FOR FUSION EXPERIMENTS* 152

P2C-D-258 SOFT COMPUTING AND CHAOS TEORY FOR ANTICIPATION OF DISRUPTION IN TOKAMAK REACTORS 153

P2C-D-263 ADSORPTION IN INSULATOR MATERIALS ENHANCED BY D IMPLANTATION 154

P2C-D-270 RADIATION ENHANCED DEGRADATION OF SIO OVERCOATED ALUMINIUM MIRRORS 155

P2C-D-272 THE NEW MEASUREMENT MONITORING SYSTEM ON FTU 156

P2C-D-281 FIRST RESULTS OF MINIMUM FISHER REGULARISATION AS UNFOLDING METHOD FOR JET NE213 LIQUID SCINTILLATOR NEUTRON SPECTROMETRY 157

P2C-D-282 PRESENT STATUS OF THE TJ-II REMOTE PARTICIPATION SYSTEM 158

P2C-D-347 APD DETECTOR ELECTRONICS AND PXI BASED DATA ACQUISITION SYSTEM FOR SST-1 THOMSON SCATTERING DIAGNOSTICS 159

P2C-D-366 REAL TIME MEASUREMENT AND CONTROL AT JET - DIAGNOSTIC SYSTEMS 160

P2C-D-370 OPTICAL FIBERS FOR PLASMA DIAGNOSTICS UNDER GAMMA-RAY AND UV IRRADIATION 161

P2C-D-384 THE HALO CURRENT SENSOR SYSTEM FOR JET-EP 162

P2C-D-396 DEVELOPMENT OF ACTIVELY COOLED PERISCOPES FOR DIVERTOR OBSERVATION 163

P2C-D-398 DIAGNOSTICS FOR STUDYING DEPOSITION AND EROSION PROCESSES IN JET 164

P2C-D-428 VULNERABILITY OF OPTICAL FIBERS FOR PLASMA DIAGNOSTICS OF LASER MEGAJOULE 165

P2C-D-433 APPLICATION OF ORTHOGONALLY POLARIZED TWO-FREQUENCY LASER TO POLARIMETER FOR MAGNETIC FIELD MEASUREMENTS OF LONG-PULSED FUSION DEVICES 166

P2C-D-437 THE TEXTOR DIAGNOSTIC DATA MANAGEMENT CHAIN 167

P2C-D-446 NEW LOW LOSS TRIAXIAL AND MAGNETICS DIAGNOSTICS FEEDTHROUGH AT JET 168

P2C-D-451 THERMO-STRESS ANALYSIS OF OPTICAL MATERIALS FOR HIGH HEAT FLUX APPLICATIONS 169

P2C-D-458 DESIGN AND MANUFACTURE OF THE UPPER COILS AND OUTER POLOIDAL COILS SUBSYSTEMS FOR THE JET-EP MAGNETIC DIAGNOSTIC 170

P2C-D-459 DESIGN OF EX-VESSEL MAGNETIC PROBES FOR JET-EP 171

P2C-D-466 TRANSDUCERS AND SIGNAL CONDITIONERS OF THE RFX NEW MAGNETIC MEASUREMENT SYSTEM 172

P2C-D-476 WIDE-ANGLE INFRARED THERMOGRAPHY FOR JET-EP 173

P2C-D-477 LITHIUM BEAM DEVELOPMENTS FOR HIGH-ENERGY PLASMA DIAGNOSTICS 174

P2C-D-502 THE NEW TAE - ALFVÉN WAVE ACTIVE EXCITATION SYSTEM AT JET 175

P2C-D-503 NEW MILLIMETER-WAVE ACCESS FOR JET REFLECTOMETRY AND ECE 176

P2C-D-504 CONTROL PROCESS STRUCTURE OF ASDEX UPGRADE´S NEW CONTROL AND DATA ACQUISITION SYSTEM 177

P2C-D-506 MULTI-SUPPORT VECTOR MACHINES FOR DISRUPTION CLASSIFICATION IN TOKAMAK REACTORS 178

P2C-D-513 OPTICAL DESIGN OF THE OBLIQUE ECE ANTENNA SYSTEM FOR JET 179

P2C-D-515 ITER DIAGNOSTICS: MAINTENANCE AND COMMISSIONING IN THE HOT CELL TEST BED 180

P2C-D-519 NEW BOLOMETRY CAMERAS FOR THE JET ENHANCED PERFORMANCE PHASE 181

- E - Magnets and Power Supplies. 182

P2T-E-9 THE BATCH PRODUCTION FOR SUPERCONDUCTING MAGNET COILS OF EAST (HT-7U) 182

P2T-E-20 STUDY ON HIGH-POWER HIGH-FREQUENCY INVERTER FOR FAST PLASMA POSITION CONTROL IN EAST SUPER-CONDUCTING TOKAMAK 183

P2T-E-23 A LOW COST JOINT FOR THE ITER PF COILS, DESIGN AND TEST RESULTS. 184

P2T-E-30 130KV 130A HIGH VOLTAGE SWITCHING MODE POWER SUPPLY FOR NEUTRAL INJECTORS - CONTROL ISSUES AND ALGORITHMS 185

P2T-E-31 FIBERGLASS UNIDIRECTIONAL COMPOSITE TO BE USED FOR ITER PRE-COMPRESSION RINGS 186

P2T-E-34 MEASUREMENT OF CONTACT RESISTANCE DISTRIBUTION IN TYPICAL ITER SIZE CONDUCTOR TERMINATION 187

P2T-E-35 UPDATING THE DESIGN OF THE FEEDER COMPONENTS FOR THE ITER MAGNET SYSTEM 188

P2T-E-36 MAGNETIC COMPATIBILITY OF STANDARD COMPONENTS FOR ELECTRICAL INSTALLATIONS: COMPUTATION OF THE BACKGROUND FIELD AND CONSEQUENCES ON THE DESIGN OF THE ELECTRICAL DISTRIBUTION BOARDS AND CONTROL BOARDS FOR THE ITER TOKAMAK BUILDING 189

P2T-E-37 COMMISSIONING OF THE 10 POWER SUPPLIES OF THE CONTROL COILS OF WENDELSTEIN 7-X EXPERIMENT 190

P2T-E-40 DESIGN AND COMMISSIONING OF THE NEW TOROIDAL FIELD COIL FOR THE NATIONAL SPHERICAL TORUS EXPERIMENT (NSTX) 191

P2T-E-48 ANALYSES AND IMPLICATIONSOF V-I CHARACTERISTIC 192

P2T-E-50 PIONEERING SUPERCONDUCTING MAGNETS IN LARGE TOKAMAKS: EVALUATION AFTER 17 YEARS OF OPERATING EXPERIENCE 193

P2T-E-55 STABILITY, THERMAL EQUILIBRIUM AND DESIGN CRITERIA FOR CABLE-IN-CONDUIT-CONDUCTORS WITH A BROAD TRANSITION TO NORMAL STATE 194

P2T-E-68 DESIGN OPTIMISATION OF THE ITER TF COIL CASE AND STRUCTURES 195

P2T-E-73 FABRICATION OF THE PLANAR COILS FOR WENDELSTEIN 7-X 196

P2T-E-81 OVERVIEW OF THE DIII–D INTERNAL RESISTIVE WALL MODE STABILIZATION POWER SUPPLY SYSTEM* 197

P2T-E-95 THE EUROPEAN DEVELOPMENT OF A FULL SCALE SWITCHING UNIT FOR THE ITER SWITCHING AND DISCHARGING NETWORKS 198

P2T-E-97 MECHANICAL PERFORMANCE OF MAGNET INSULATION MATERIALS FABRICATED BY THE “INSULATE-WIND-AND-REACT “ TECHNIQUE* 199

P2T-E-99 INFLUENCE OF PARAMETER VARIATIONS ON THE FATIGUE BEHAVIOR OF MAGNET INSULATION SYSTEMS 200

P2T-E-101 MAGNETIC COMPATIBILITY OF STANDARD COMPONENTS FOR ELECTRICAL INSTALLATIONS: TESTS ON PROGRAMMABLE LOGICAL CONTROLLERS AND OTHER ELECTRONIC DEVICES 201

P2T-E-105 DESIGN, FABRICATION AND INSTALLATION OF CRYOGENIC TARGET SYSTEM FOR 14 MEV NEUTRON IRRADIATION 202

P2T-E-106 THE EUROPEAN NB3SN ADVANCED STRAND DEVELOPMENT PROGRAMME 203

P2T-E-111 DESIGN AND DEVELOPMENT OF THE POWER SUPPLY SYSTEM FOR HL-2A TOKAMAK 204

P2T-E-112 THE ITER THERMAL SHIELDS FOR THE MAGNET SYSTEM: DESIGN EVOLUTION AND ANALYSIS 205

P2T-E-121 QUALITY ASSURANCE PROCEDURES IN THE EAST MAGNETS MANUFACTURING PROCESS 206

P2T-E-126 THYRISTOR CROWBAR SYSTEM FOR THE HIGH CURRENT POWER SUPPLIES OF ASDEX UPGRADE 207

P2T-E-186 OPTIMIZATION OF THE POWER SUPPLY FOR A HELIAS REACTOR SUPERCONDUCTING COIL SYSTEM 208

P2T-E-198 QUENCH CURRENT MEASUREMENT AND PERFORMANCE EVALUATION OF THE EAST TOROIDAL FIELD COILS 209

P2T-E-209 THERMAL AND STRUCTURAL ANALYSIS OF THE W7-X MAGNET HEAT RADIATION SHIELD 210

P2T-E-212 FILAMENT POWER SUPPLY (AC TO AC CONVERTER) FOR LONG PULSE NEUTRAL BEAM INJECTOR OF SST-1 211

P2T-E-219 TRANSIENT ELECTRICAL BEHAVIOUR OF THE ITER TF COILS DURING FAST DISCHARGE AND TWO FAULT CASES 212

P2T-E-223 STUDIES ON THE BEHAVIOR OF MULTISECONDARY TRANSFORMERS USED FOR REGULATED HV POWER SUPPLIES 213

P2T-E-236 HIGH POWER IGBT BRIGE APPLICATION FOR THE HARMONIC SUPPRESSION IN THE POWER SUPPLY SYSTEM OF THE SPANISH STELLARATOR TJ-II. 214

P2T-E-259 MANUFACTURE AND TEST OF THE NON-PLANAR COILS FOR WENDELSTEIN 7-X 215

P2T-E-266 V-I CHARACTERISTICS WITH BUMPS IN THE MEDIUM SIZE NBTI CICC CABLES. 216

P2T-E-284 HIGH TEMPERATURE SUPERCONDUCTORS FOR THE ITER MAGNET SYSTEM AND BEYOND 217

P2T-E-299 ANALYSIS OF THE RESISTIVE TRANSITION IN NB-TI CABLE-IN-CONDUIT CONDUCTORS VIA AN EXTENDED 1-D MODEL 218

P2T-E-304 EFFECTIVE BENDING STRAIN ESTIMATED FROM IC TEST RESULT OF D SHAPED NB3AL CICC COIL FABRICATED WITH A REACT AND WIND PROCESS FOR THE NATIONAL CENTRALIZED TOKAMAK 219

P2T-E-306 ELIMINATION OF VARIABLE HARMONICS ON MOTOR GENERATOR CIRCUIT FOR EXPERIMENTAL FUSION FACILITY 220

P2T-E-311 FATIGUE ASSESSMENT OF THE ITER TF COIL CASE BASED ON JJ1 FATIGUE TESTS 221

P2T-E-326 EFFECT OF ELECTRICAL CHARACTERISTICS OF SIC POWER DEVICE ON OPERATIONAL EFFICIENCY OF AC/DC CONVERTER 222

P2T-E-338 DESIGN REQUIREMENT, QUALIFICATION TESTS AND INTEGRATION OF A THIN SOLID LUBRICANT FILM OF MOS2 FOR COLD MASS SUPPORT STRUCTURE OF THE STEADY STATE SUPERCONDUCTING TOKAMAK SST-1. 223

P2T-E-344 HOW SHOULD WE TEST THE ITER TF COILS ? 224

P2T-E-379 CYCLIC TESTING OF SHEAR KEYS FOR THE ITER MAGNET SYSTEM 225

P2T-E-390 MODULAR COIL DESIGN DEVELOPMENTS FOR THE NATIONAL COMPACT STELLARATOR EXPERIMENT (NCSX) 226

P2T-E-394 CONCEPTUAL DESIGN OF SPHERICAL TORUS WITH TF-CS HYBRID COILS BASED ON VIRIAL THEOREM 227

P2T-E-405 EMI ON DIAGNOSTICS AND CONTROL CIRCUITS DUE TO SWITCHING POWER SUPPLIES 228

P2T-E-406 THE CONTROL SYSTEM OF THE TOROIDAL POWER SUPPLY OF RFX 229

P2T-E-417 COMPONENTS AND SYSTEM TESTS ON THE RFX TOROIDAL POWER SUPPLY 230

P2T-E-420 COMMISSIONING AND OPERATION OF 130KV/130A SWITCHED-MODE HV POWER SUPPLIES WITH THE UPGRADED JET NEUTRAL BEAM INJECTORS 231

P2T-E-427 MAGNETIC COMPATIBILITY OF STANDARD COMPONENTS FOR ELECTRICAL INSTALLATIONS: TESTS ON LOW VOLTAGE CIRCUIT BREAKERS AND CONTACTORS 232

P2T-E-442 FIRST INTEGRATED TEST OF THE SUPERCONDUCTING MAGNET SYSTEMS FOR THE LEVITATED DIPOLE EXPERIMENT (LDX) 233

P2T-E-462 MODELING AC LOSSES IN THE ITER NBTI FULL SIZE JOINT SAMPLES USING THE THELMA CODE 234

P2T-E-471 POWER DISSIPATION AND ENERGY TRANSFER DURING TESTING OF THE ITER TOROIDAL FIELD MODEL COIL 235

P2T-E-490 DC AND TRANSIENT CURRENT DISTRIBUTION ANALYSIS FROM SELF-FIELD MEASUREMENTS ON ITER PFIS CONDUCTOR 236

P2T-E-491 THE MAGNET SYSTEM OF THE KTM TOKAMAK 237

P2T-E-511 OPTIMISATION OF THE CURRENT DISTRIBUTION IN THE IGNITOR POLOIDAL FIELD COILS AND EVALUATION OF THE COILS TEMPERATURES AND RESISTANCE DURING THE REFERENCE OPERATING SCENARIO 238

P2T-E-528 SAFETY ASSESSMENT OF THE ITER COILS SYSTEM 239

P2T-E-534 WINDING MACHINES FOR THE MANUFACTURING OF SUPERCONDUCTIVE COILS OF THE MAIN EUROPEAN FUSION RESEARCH MACHINES 240

P2T-E-539 A SUCCESS STORY: LHC CABLE PRODUCTION AT ALSTOM MSA 241

- F - Plasma Facing Components. 242

P4C-F-8 TILES CHAMFERING AND POWER HANDLING OF THE MK II HD DIVERTOR 242

P4C-F-12 THERMAL AND MECHANICAL ANALYSIS OF THE EAST PLASMA FACING COMPONENTS 243

P4C-F-13 THE DYNAMIC ERGODIC DIVERTOR IN TEXTOR – A NOVEL TOOL FOR STUDYING MAGNETIC PERTURBATION FIELD EFFECTS 244

P4C-F-24 EAST(HT-7U) IN-VESSEL COMPONENTS DESIGN 245

P4C-F-27 HOT RADIAL PRESSING: AN ALTERNATIVE TECHNIQUE FOR THE MANUFACTURING OF PLASMA-FACING COMPONENTS 246

P4C-F-28 HETS PERFORMANCES IN HE COOLED POWER PLANT DIVERTOR 247

P4C-F-32 THE INFLUENCE OF IRRADIATION REGIMES ON RETENTION HYDROGEN ISOTOPES IN STRUCTURAL MATERIALS 248

P4C-F-33 MANUFACTURING TECHNOLOGY DEVELOPMENT FOR THE VACUUM VESSEL AND PLASMAFACING COMPONENTS 249

P4C-F-41 ENGINEERING AND THERMAL-HYDRAULIC DESIGN OF PFC COOLING FOR SST-1 TOKAMAK 250

P4C-F-49 THE USE OF COPPER ALLOY CUCRZR AS A STRUCTURAL MATERIAL FOR ACTIVELY COOLED PLASMA FACING AND IN VESSEL COMPONENTS 251

P4C-F-54 MANUFACTURING OF THE W7-X DIVERTOR AND WALL PROTECTION 252

P4C-F-59 STUDIES ON GRAPHITE SURFACES DETRITIATION BY PULSED REPETITION RATE NANOSECOND LASERS 253

P4C-F-66 STEADY STATE AND TRANSIENT THERMAL-HYDRAULIC ANALYSES ON ITER DIVERTOR MODULE 254

P4C-F-69 APPLIED TECHNOLOGIES AND INSPECTIONS FOR THE W7-X PRE-SERIES TARGET ELEMENTS 255

P4C-F-76 OVERVIEW OF THE ENGINEERING DESIGN OF THE ITER DIVERTOR 256

P4C-F-92 TOWARDS THE DEVELOPMENT OF WORKABLE ACCEPTANCE CRITERIA FOR THE DIVERTOR CFC MONOBLOCK ARMOUR. 257

P4C-F-100 RESULTS AND ANALYSIS OF HIGH HEAT FLUX TESTS ON A FULL SCALE VERTICAL TARGET PROTOTYPE OF ITER DIVERTOR 258

P4C-F-115 STRUCTURAL AND FRACTURE MECHANICS ANALYSIS OF ITER TOROIDAL FIELD COIL 259

P4C-F-116 CRACK PROPAGATION BEHAVIOR AROUND DSCU/SS316 HIP BONDED INTERFACE BY THERMAL FATIGUE 260

P4C-F-133 SIMULATION OF MANY-ATOMIC INTERACTIONS IN W-O-H SYSTEM WITH THE MD CODE CADAC 261

P4C-F-135 DESIGN OF A LIMITER FOR THE JET EP ICRH ANTENNA 262

P4C-F-145 EROSION OF TUNGSTEN MACROBRUSH ARMOR AFTER MULTIPLE INTENSE TRANSIENT EVENTS IN ITER 263

P4C-F-146 DEVELOPMENT OF AN ORIGINAL ACTIVE THERMOGRAPHY METHOD ADAPTED TO ITER PLASMA FACING COMPONENTS CONTROL 264

P4C-F-162 PLASMA SPRAYED TUNGSTEN-BASED COATINGS AND THEIR PERFORMANCE UNDER FUSION RELEVANT CONDITIONS 265

P4C-F-167 HIGH TEMPERATURE STRESSES IN ITER RELEVANT BRAZED GLIDCOP/W MODEL STRUCTURES 266

P4C-F-176 A MATURE INDUSTRIAL SOLUTION FOR ITER DIVERTOR PLASMA FACING COMPONENTS: HYPERVAPOTRON COOLING CONCEPT ADAPTED TO TORE SUPRA FLAT TILE TECHNOLOGY 267

P4C-F-192 CONCEPTUAL DESIGN OD A HIGH-TEMPERATURE WATER-COOLED DIVERTOR FOR A FUSION POWER REACTOR 268

P4C-F-195 DEVELOPMENT OF A COPPER ALLOY TO BERYLLIUM HIP BONDING TECHNOLOGY FOR THE ITER FIRST WALL 269

P4C-F-228 AN ADVANCED HE-COOLED DIVERTOR CONCEPT: DESIGN, COOLING TECHNOLOGY, AND THERMOHYDRAULIC ANALYSES WITH CFD 270

P4C-F-239 THE NEW ELECTRON BEAM TEST FACILITY JUDITH II FOR HIGH HEAT FLUX EXPERIMENTS ON PLASMA FACING COMPONENTS. 271

P4C-F-253 FORMATION OF CRYSTALLINE NANOSTRUCTURES DURING DEUTERIUM PLASMA INTERACTION WITH TUNGSTEN-BASED MATERIALS IN SIMULATED GAS DIVERTOR CONDITIONS. 272

P4C-F-265 ACTIVITY OF THE EUROPEAN HIGH HEAT FLUX TEST FACILITY: FE200 273

P4C-F-274 PROPOSAL OF LITIZATION OF FTU VACUUM VESSEL BY USING A LITHIUM LIMITER 274

P4C-F-278 DESIGN, PERFORMANCE AND CONSTRUCTION OF A 2 MW ION BEAM TEST FACILITY FOR PLASMA FACING COMPONENTS 275

P4C-F-279 SPECTROSCOPIC STUDIES OF HOMOGENEOUS CARBON FLAKES WITH A HIGH DEUTERIUM CONTENT FORMED IN TOKAMAK T-10 276

P4C-F-280 VACUUM PLASMA-SPRAYED TUNGSTEN ON EUROFER AND 316L - RESULTS OF CHARACTERISATION AND THERMAL LOADING TESTS - 277

P4C-F-285 CAN TOKAMAK DEVICES SURVIVE ELMS DURING NORMAL OPERATION? A SIMULATION STUDY 278

P4C-F-294 EU R&D ON DIVERTOR COMPONENTS 279




Похожие документы:

  1. Fusion Transmutation of Waste Design and Analysis of the In-Zinerator Concept

    Документ
    ... Service 5285 Port Royal Rd Springfield, VA 22161 ... Parameters 21 3.1 Chamber Design 23 3.1.1 Shock Mitigation 24 3.1.2 ... Recovery from 17Li-83Pb,” FusionTechnology, 8, 887 (1985). ... for TFTR,” 15th IEEE/NPSS SymposiumonFusion Engineering, 1, 69 (1993 ...
  2. 标题 Word alignment of English-Chinese bilingual corpus based on chunks

    Документ
    ... Acad Sci, Inst Software, R&D Ctr Parallel Software, Beijing 100080 ... Xiamen, PEOPLES R CHINA 会议赞助商: Fujian Normal Univ.; Fujian Digital Certificate Author Co ... International Symposiumon Automated Technology for Verification and Analysis 会议日期: OCT 20-23, ...
  3. Page 278 9/23/2013 Bibliography on multilingualism bilingual and indigenous/minority education linguistic human rights language and power the subtractive spread of English the relationship between linguistic diversity and biodiversity

    Документ
    ... , manuscript. Andreassen, Bård-Anders and Swinehart, Theresa ... : Multilingual Matters. Fishman, Joshua A. & Fishman Schweid, Gella (2000 ... ) & Leiden: Intermediate Technologies, Leiden University). Posey, ... Nobel Symposiumon Human Rights, Oslo, June 20 23, ...
  4. This rtf file was exported from an endnote library of 6204 mainly journal publications on knowledge management on December 9

    Документ
    ... of a priori knowledge for information fusion. Information Fusion, 7(2), 161-175. Bösser, ... government-university-industry (GUI) R&D partnerships in the US, ... Symposiumon Information Technologies and Applications in Education (Isitae 2007), 23- ...
  5. 31st international symposium on archaeometry budapest 27 april - 1 may 1998

    Документ
    ... Budapest 31st International Symposiumon Archaeometry Budapest, 27 ... , Wien. 23. An osteological ... origins) and technological (production) interpretations ... ra leletei Tiszajenőn, Arch. Ért. 1976.) - Öcsöd-Kov ... earthy admixtures. Fission Track studies ...

Другие похожие документы..